Lexium Stepper Motor Drive SD3 Catalogue 2008
声明：您必须遵守我们的协议，如果您下载了该资源行为将被视为对《电天下账号管理规范》全部内容的认可，本网站资源来自原创，仅供用于学习和交流，请勿用于商业用途。如有侵权、不妥之处，请举报本资源，我们将及时审核处理！
Lexium Stepper Motor Drive SD3 Catalogue 2008.
文本预览
Lexium Stepper Motor Drive SD3
Catalogue
2008Product offer Lexium SD3 motion control
Lexium stepper motor drives
Fieldbus Product offer
A Schneider Electric stepper motor drive system comprises of an SD3 stepper motor
drive and a BRS3 3-phase stepper motor.
Reference values are set and, if applicable, monitored by a master PLC or a
SD328 Schneider Electric Motion Controller (e.g. Lexium Motion Controller).
Together with Schneider Electric BRS3 stepper motors, SD3 is a very compact, high-
performance drive system.
Lexium Compactness
Motion
Controller With its small dimensions (H x W x D: 145 mm x 72 mm x 140 mm), the SD3 stepper
motor drive requires very little space in the control cabinet.
BRS3
Simplicity
Simple cabling and parameterisation of the SD326 allow for easy and quick
commissioning. Commissioning software is not required.
The SD328 drives are convenient to con gure via the integrated control panel (HMI),
via eldbus or with the Lexium CT PC commissioning software.
Pulse train
(P/D, A/B, CW/CCW)
Flexibility
SD3 stepper motor drives are available in two power classes: 2.5 A and 6.8 A. The
SD3 stepper motor drives are delivered with the following components depending on
the device type:
b An opto-isolated signal interface for 5 V and 24 V input signals (SD326)
b An RS422 interface for pulse/direction signals or A/B encoder signals (SD328)
b A eldbus interface for SD328: CANopen and Modbus (SD328A) or PROFIBUS DP
(SD328B):
SD326 The CANopen interface of the SD328A can be used for connection to a CANopen
AutomationBus or a CANopen MotionBus.
Movements of up to eight drive axes can be synchronously controlled by one
Motion Controller (e.g. Lexium Motion Controller) via the CANopen MotionBus.
b Analogue reference value input ±10 V (SD328)
b A power supply unit for single-phase mains voltages of 115 Vz and 230 Vz
b Integrated mains lter
The SD326 can optionally be shipped with an electronic system for rotation
monitoring and brake control.
Application areas
A stepper motor drive system from Schneider Motion has excellent constant velocity
characteristics, which are required for applications such as scanning or exposure.
Due to the high torque at low speeds of rotation, the SD3 stepper drive system is
particularly suited for short-distance positioning.
Another advantage is its high holding torque at standstill. This allows for the highly
economic implementation of automation tasks such as "pick and place".
1 version: 1.0 62030-EN_Ver1.0.inddProduct offer (continued) Lexium SD3 motion control
Lexium stepper motor drives
Assignment of BRS3 3-phase stepper motors and SD3 stepper motor drives
BRS3 3-phase stepper motors SD326pU25 SD328pU25 SD326pU68 SD328pU68
115 V / 230 V; 2.5 A; including mains lter 115 V / 230 V; 6.8 A; including mains lter and
fan
BRS368 1.7 Nm / 1.5 Nm (1)
BRS397 2.3 Nm / 2.0 Nm
BRS39A 4.5 Nm / 4.0 Nm
BRS39B 6.8 Nm / 6.0 Nm
BRS3AC 13.5 Nm / 12.0 Nm
BRS3AD 19.7 Nm / 16.5 Nm
(1) The 1st value is the holding torque M when the stepper motor is at a standstill, the 2nd value is the nominal torque M when the motor is in operation.
H N
62030-EN_Ver1.0.indd version: 1.0 2Characteristics Lexium SD3 motion control
SD326 stepper motor drives
Certi cations
Conformity to standards Lexium Stepper Motor Drive SD3 have been developed to conform to the strictest
international standards and with the recommendations for electronic control systems
in the industry, speci cally: low-voltage switchgear, IEC/EN 61800-5-1, IEC/EN
50178, IEC/EN 61800-3 (noise immunity to conducted and radiated high-frequency
signals).
EMC immunity IEC/EN 61800-3, environments 1 and 2;
IEC/EN 61000-4-2 level 3;
IEC/EN 61000-4-3 level 3;
IEC/EN 61000-4-4 level 4;
IEC/EN 61000-4-5 level 3;
Conducted and radiated IEC/EN 61800-3, environments 1 and 2, categories C2, C3
EMC emissions b Devices without external mains lter:
v C3 up to 10 m motor cable length
b Devices without external mains lter:
v C2 up to 20 m motor cable length
v C3 up to 50 m motor cable length
e marking The drives are e marked in accordance with the European low voltage (2006/95/EC)
and EMC (89/336/EEC) directives.
Product certi cation UL (USA), cUL (Canada)
Ambient conditions
Operating temperature (1) °C 0 ... +50
Operating temperature when used in accordance with UL (1) °C 0 ... +40
Transport and storage temperature °C -25 ... +70
Pollution degree Level 2
Relative humidity % 5 ... 85%, no condensation allowed
Max. installation height over m.s.l. without power loss m < 1000
m < 2000 at max. ambient temperature 40°C, no protective lm and a lateral distance of
> 50mm
Vibration test as per IEC/EN 60068-2-6 3 ... 13 Hz: 1.5 mm peak
13 ... 150 Hz: 1 gn
Shock test as per IEC/EN 60068-2-27 15 gn for 11 ms
Degree of protection IP 20
IP 40 restricted: only from above without removal of protective lm.
Electrical data
Mains supply SD326pU25 SD326pU28
Nominal voltage (switchable) V 115 / 230 (1z)
Catalogue
2008Product offer Lexium SD3 motion control
Lexium stepper motor drives
Fieldbus Product offer
A Schneider Electric stepper motor drive system comprises of an SD3 stepper motor
drive and a BRS3 3-phase stepper motor.
Reference values are set and, if applicable, monitored by a master PLC or a
SD328 Schneider Electric Motion Controller (e.g. Lexium Motion Controller).
Together with Schneider Electric BRS3 stepper motors, SD3 is a very compact, high-
performance drive system.
Lexium Compactness
Motion
Controller With its small dimensions (H x W x D: 145 mm x 72 mm x 140 mm), the SD3 stepper
motor drive requires very little space in the control cabinet.
BRS3
Simplicity
Simple cabling and parameterisation of the SD326 allow for easy and quick
commissioning. Commissioning software is not required.
The SD328 drives are convenient to con gure via the integrated control panel (HMI),
via eldbus or with the Lexium CT PC commissioning software.
Pulse train
(P/D, A/B, CW/CCW)
Flexibility
SD3 stepper motor drives are available in two power classes: 2.5 A and 6.8 A. The
SD3 stepper motor drives are delivered with the following components depending on
the device type:
b An opto-isolated signal interface for 5 V and 24 V input signals (SD326)
b An RS422 interface for pulse/direction signals or A/B encoder signals (SD328)
b A eldbus interface for SD328: CANopen and Modbus (SD328A) or PROFIBUS DP
(SD328B):
SD326 The CANopen interface of the SD328A can be used for connection to a CANopen
AutomationBus or a CANopen MotionBus.
Movements of up to eight drive axes can be synchronously controlled by one
Motion Controller (e.g. Lexium Motion Controller) via the CANopen MotionBus.
b Analogue reference value input ±10 V (SD328)
b A power supply unit for single-phase mains voltages of 115 Vz and 230 Vz
b Integrated mains lter
The SD326 can optionally be shipped with an electronic system for rotation
monitoring and brake control.
Application areas
A stepper motor drive system from Schneider Motion has excellent constant velocity
characteristics, which are required for applications such as scanning or exposure.
Due to the high torque at low speeds of rotation, the SD3 stepper drive system is
particularly suited for short-distance positioning.
Another advantage is its high holding torque at standstill. This allows for the highly
economic implementation of automation tasks such as "pick and place".
1 version: 1.0 62030-EN_Ver1.0.inddProduct offer (continued) Lexium SD3 motion control
Lexium stepper motor drives
Assignment of BRS3 3-phase stepper motors and SD3 stepper motor drives
BRS3 3-phase stepper motors SD326pU25 SD328pU25 SD326pU68 SD328pU68
115 V / 230 V; 2.5 A; including mains lter 115 V / 230 V; 6.8 A; including mains lter and
fan
BRS368 1.7 Nm / 1.5 Nm (1)
BRS397 2.3 Nm / 2.0 Nm
BRS39A 4.5 Nm / 4.0 Nm
BRS39B 6.8 Nm / 6.0 Nm
BRS3AC 13.5 Nm / 12.0 Nm
BRS3AD 19.7 Nm / 16.5 Nm
(1) The 1st value is the holding torque M when the stepper motor is at a standstill, the 2nd value is the nominal torque M when the motor is in operation.
H N
62030-EN_Ver1.0.indd version: 1.0 2Characteristics Lexium SD3 motion control
SD326 stepper motor drives
Certi cations
Conformity to standards Lexium Stepper Motor Drive SD3 have been developed to conform to the strictest
international standards and with the recommendations for electronic control systems
in the industry, speci cally: low-voltage switchgear, IEC/EN 61800-5-1, IEC/EN
50178, IEC/EN 61800-3 (noise immunity to conducted and radiated high-frequency
signals).
EMC immunity IEC/EN 61800-3, environments 1 and 2;
IEC/EN 61000-4-2 level 3;
IEC/EN 61000-4-3 level 3;
IEC/EN 61000-4-4 level 4;
IEC/EN 61000-4-5 level 3;
Conducted and radiated IEC/EN 61800-3, environments 1 and 2, categories C2, C3
EMC emissions b Devices without external mains lter:
v C3 up to 10 m motor cable length
b Devices without external mains lter:
v C2 up to 20 m motor cable length
v C3 up to 50 m motor cable length
e marking The drives are e marked in accordance with the European low voltage (2006/95/EC)
and EMC (89/336/EEC) directives.
Product certi cation UL (USA), cUL (Canada)
Ambient conditions
Operating temperature (1) °C 0 ... +50
Operating temperature when used in accordance with UL (1) °C 0 ... +40
Transport and storage temperature °C -25 ... +70
Pollution degree Level 2
Relative humidity % 5 ... 85%, no condensation allowed
Max. installation height over m.s.l. without power loss m < 1000
m < 2000 at max. ambient temperature 40°C, no protective lm and a lateral distance of
> 50mm
Vibration test as per IEC/EN 60068-2-6 3 ... 13 Hz: 1.5 mm peak
13 ... 150 Hz: 1 gn
Shock test as per IEC/EN 60068-2-27 15 gn for 11 ms
Degree of protection IP 20
IP 40 restricted: only from above without removal of protective lm.
Electrical data
Mains supply SD326pU25 SD326pU28
Nominal voltage (switchable) V 115 / 230 (1z)
AIGC当然可以。"Lexium Stepper Motor Drive SD3 Catalogue 2008" 是一份具体的产品目录，由法国施耐德电气（Schneider Electric）旗下的 Lexium 品牌在2008年发布。这份目录详细介绍了SD3型步进电机驱动器系列，它是一种专为伺服和定位应用设计的高性能、高精度驱动解决方案。SD3系列可能包括各种规格的驱动单元，如不同电流等级、多种通信接口选项（如RS-485、 EtherNet/IP等）、多细分度控制、以及高级运动控制功能，如位置检测、速度和加速度调节、以及脉冲前沿跳跃（Pulse-Width Modulation, PWM）技术等。
内容中会包含各个型号的详细介绍、技术参数、电气特性、安装指南、接线图示、应用示例及选配件说明等，旨在帮助用户选择最适合其项目的步进电机驱动器，并确保正确、高效地将其集成到自动化系统中。由于时间久远，请注意该目录的具体信息可能会随施耐德电气产品和技术的发展有所更新或变迁。
相关资源推荐
