C.A 6470 Earth and resistivity tester
声明：您必须遵守我们的协议，如果您下载了该资源行为将被视为对《电天下账号管理规范》全部内容的认可，本网站资源来自原创，仅供用于学习和交流，请勿用于商业用途。如有侵权、不妥之处，请举报本资源，我们将及时审核处理！
C.A 6470 Earth and resistivity tester。
文本预览
C.A 6470
Earth
and resistivity
tester
A complete, rapid appraisal of earths
MULTI-FUNCTION
• Earth resistance
• Earth coupling
• Soil resistivity
• Continuity / Resistance
ERGONOMIC
• Rugged, water-tight field casing
• Giant back-lit LCD display
• Direct access to the measurements
by selector switch
• Battery can be recharged from mains
or vehicle cigar lighter
RELIABLE & ACCURATE
• Uses conventional
rod methods
• Automatic recognition
of poor connections
or presence of parasitic
voltage
EFFECTIVE
• Extensive measurement range: resistance from 0.01 to 100 k
Ω Ω
• Possibility of selecting measurement frequency from 41 Hz to 512 Hz
• Automatic calculation of earth coupling coefficient and of soil
resistivityEARTH MEASUREMENT BY 3-ROD METHOD
Traditional method using rods to measure the resistance R of an existing earth electrode
E
The resistances of the auxiliary rods, R and R , can also be measured.
S H
The user can choose the measurement frequency between 41 Hz and 512 Hz;
the instrument also does this automatically.
CHARACTERISTICS
• range of resistance R : from 0.01 to 100 k
E Ω Ω
• choice of measurement voltage: 16 or 32 Vrms
• adjustable measurement frequency: 41 to 512 Hz
• R and R : measurement from 0.01 to 100 k
S H Ω Ω
• U maximum 60 V
parasitic peak
UTILITY OF CHOOSING
THE MEASUREMENT
FREQUENCY:
the instrument or the user chooses
the measurement frequency
at which the influence
of parasitic voltage
is least.
Particular measurement:
EARTH COUPLING MEASUREMENT
To estimate the mutual influence of 2 earth resistances that are not connected to one another,
it is essential to calculate the coupling coefficient, which must be as low as possible.
The operator makes 3 successive measurements (2 conventional earth measurements by the 3-rod method - R
1
& R - and 1 earth measurement by the 2-rod method – R ) and the instrument automatically calculates the
2 1-2
coupling resistance:
Rc = (R + R – R ) / 2
1 2 1-2
MT network BT network MT network BT network MT network BT network
Phase Phase Phase
Neutral Neutral Neutral
(Same characteristics
as the conventional
earth measurement by
the 3-rod method)SOIL RESISTIVITY MEASUREMENT
When it is possible to choose the location of the earth electrode, the resistivity measurement serves
to qualify the soil and so determine the location where the earth resistance will be lowest
(optimization of construction costs).
The C.A 6470 automatically calculates the soil resistivity by the Wenner or Schlumberger method,
ρ
as soon as the distances between the rods have been programmed.
The resistances of the rods, R , R , R and R , can also be measured.
E ES S H
The measurement frequency can also be chosen.
CHARACTERISTICS
• range of resistance R : from 0.01 to 100 k
S-SE Ω Ω
• choice of measurement voltage: 16 or 32 Vrms
• adjustable measurement frequency: 41 to 128 Hz
• R , R , R and R : measurement from 0.01 to 100 k
E ES S H Ω Ω
• U maximum 60 V
parasitic peak
• automatic calculation of by the Wenner or Schlumberger method if distances entered
ρ
Reminder
methods of calculation of soil resistivity
ρ
•WENNER METHOD: •SCHLUMBERGER METHOD:
- the distances between the 4 rods are identical: d - the distance between the 2 inner rods S & ES is A
- = 2. .d.R -the distance between the 2 outer rods E & H is 2d
ρW π S-ES
- = ( .(d2-A2/4).R ) /4
ρS π S-ES
Earth
and resistivity
tester
A complete, rapid appraisal of earths
MULTI-FUNCTION
• Earth resistance
• Earth coupling
• Soil resistivity
• Continuity / Resistance
ERGONOMIC
• Rugged, water-tight field casing
• Giant back-lit LCD display
• Direct access to the measurements
by selector switch
• Battery can be recharged from mains
or vehicle cigar lighter
RELIABLE & ACCURATE
• Uses conventional
rod methods
• Automatic recognition
of poor connections
or presence of parasitic
voltage
EFFECTIVE
• Extensive measurement range: resistance from 0.01 to 100 k
Ω Ω
• Possibility of selecting measurement frequency from 41 Hz to 512 Hz
• Automatic calculation of earth coupling coefficient and of soil
resistivityEARTH MEASUREMENT BY 3-ROD METHOD
Traditional method using rods to measure the resistance R of an existing earth electrode
E
The resistances of the auxiliary rods, R and R , can also be measured.
S H
The user can choose the measurement frequency between 41 Hz and 512 Hz;
the instrument also does this automatically.
CHARACTERISTICS
• range of resistance R : from 0.01 to 100 k
E Ω Ω
• choice of measurement voltage: 16 or 32 Vrms
• adjustable measurement frequency: 41 to 512 Hz
• R and R : measurement from 0.01 to 100 k
S H Ω Ω
• U maximum 60 V
parasitic peak
UTILITY OF CHOOSING
THE MEASUREMENT
FREQUENCY:
the instrument or the user chooses
the measurement frequency
at which the influence
of parasitic voltage
is least.
Particular measurement:
EARTH COUPLING MEASUREMENT
To estimate the mutual influence of 2 earth resistances that are not connected to one another,
it is essential to calculate the coupling coefficient, which must be as low as possible.
The operator makes 3 successive measurements (2 conventional earth measurements by the 3-rod method - R
1
& R - and 1 earth measurement by the 2-rod method – R ) and the instrument automatically calculates the
2 1-2
coupling resistance:
Rc = (R + R – R ) / 2
1 2 1-2
MT network BT network MT network BT network MT network BT network
Phase Phase Phase
Neutral Neutral Neutral
(Same characteristics
as the conventional
earth measurement by
the 3-rod method)SOIL RESISTIVITY MEASUREMENT
When it is possible to choose the location of the earth electrode, the resistivity measurement serves
to qualify the soil and so determine the location where the earth resistance will be lowest
(optimization of construction costs).
The C.A 6470 automatically calculates the soil resistivity by the Wenner or Schlumberger method,
ρ
as soon as the distances between the rods have been programmed.
The resistances of the rods, R , R , R and R , can also be measured.
E ES S H
The measurement frequency can also be chosen.
CHARACTERISTICS
• range of resistance R : from 0.01 to 100 k
S-SE Ω Ω
• choice of measurement voltage: 16 or 32 Vrms
• adjustable measurement frequency: 41 to 128 Hz
• R , R , R and R : measurement from 0.01 to 100 k
E ES S H Ω Ω
• U maximum 60 V
parasitic peak
• automatic calculation of by the Wenner or Schlumberger method if distances entered
ρ
Reminder
methods of calculation of soil resistivity
ρ
•WENNER METHOD: •SCHLUMBERGER METHOD:
- the distances between the 4 rods are identical: d - the distance between the 2 inner rods S & ES is A
- = 2. .d.R -the distance between the 2 outer rods E & H is 2d
ρW π S-ES
- = ( .(d2-A2/4).R ) /4
ρS π S-ES
AIGC您好，C.A 6470 Earth and Resistivity Tester是一款专业的地电阻和导电率测试设备。它主要用于测量土壤、地下水位、建筑物地基、电缆线路等的电阻值，以评估其导电性能和安全性。这款设备通常用于电气工程、地质勘查、环境监测以及电力设施维护等领域。通过C.A 6470，您可以快速准确地了解地下的电导状况，这对于接地系统的优化和故障排查非常重要。如果您有关于该设备的操作、功能或使用上的问题，欢迎随时向我提问。
相关资源推荐
